PENGARUH VARIASI PANJANG PEGAS KOPLING TERHADAP PERFORMA DAN KONSUMSI BAHAN BAKAR PADA HONDA TIGER 200 CC

Panji Laksono Adji, Kuntang Winangun, Yoyok Winardi
DOI: 10.24269/jkt.v5i1.681 DOI (PDF): http://dx.doi.org/10.24269/jkt.v5i1.681.g443

Abstract


Good acceleration and performance are influenced by the degree of flexibility of the clutch springs. The objective that underlies the implementation of this study is to determine the effect of replacing the clutch spring with different length variations. In this study, the data taken is the torque, power and fuel consumption of each type of clutch spring. In this test, two types of clutch springs were used, namely the standard clutch spring and the TDR type coupling spring which were varied in length (38.31mm), (40.93mm) with the addition of 2mm (42.93mm), (40.31mm) rings. also cutting thread 2mm (38.93mm), (36.31mm). Tests were carried out using a dynotest tool with an engine speed of 4000 rpm to 9000 rpm transmission position six. In the TDR clutch spring (42.93mm) there is an increase in torque of 7.42% with a torque yield of 16.20 Nm at 6000 rpm and an increase in power of 6.61% with a power yield of 14.5 HP at 7000 rpm. For fuel consumption TDR coupling spring at ideal rotation (low-medium), an increase of 9.68%. The decrease in fuel consumption only occurred at the top / high speed of 6.32%. For the test results pertalite ethanol fuel, there is a decrease in fuel consumption compared to pertalite fuel for all RPM variables


Keywords


Type of Coupling Spring Standard and TDR, Effect, and Performance

References


KUSUMA, I. M. W. W.; SUKADANA. I. G. K,; ADNYANA, I. W. B. Kajian Eksperimental Unjuk Kerja Mesin Menggunakan Bahan Bakar Arak Bali. J. Ilm. Tek. DESAIN Mek, 2017,

2: 227-231

M. L. Mathur, d. R. (1980). A Course In Internal Combustion Engines. Moscow: Dhanpat Rai.

Mardiansyah, A. (2015). Analisis Performa Mesin Menggunakan Bahan Bakar Premium Terhadap Daya dan Torsi Pada Toyota Kijang Inova Engine 1TR-FE. Semarang: Under Graduates thesis, Universitas Negeri Semarang.

Murdianto, I. (2016). Perbedaan Performa (Daya, Torsi, Konsumsi Bahan Bakar) Menggunakan Injektor Standart Dan Injektor Racing Dengan Bahan Bakar Pertamax Dan Pertamax Plus Pada Sepeda Motor V-XION. Under Graduates thesis, Universitas Negeri Semarang, 1-54.

Nurliansyah Putra, I. H. (2014). Pengaruh Jenis Bahan Bakar Bensis Dan Variasi Rasio Kompresi Pada Sepeda Motor Suzuki Shogun FL 125 Tahun 2007. Jurnal FKIP UNS Vol. 2 No. 3, 1-11.

Reza Prakoso Ramadhan, I. N. (2016). Studi Eksperimen Pengaruh Variasi Pegas Kopling Terhadap Gaya Dorong Dan Percepatan Pada Kendaraan Yamaha Vixion 150cc. repository.its.ac.id, 295-300.

Rahmanto, R. H. (2014). Modifikasi Kopling Jenis Plat Banyak Dengan Pemberian Lubang-Lubang pada Plat Baja Untuk Meningkatkan Efektifitas Kerja Kopling. Jurnal Imiah Teknik Mesin, Vol. 2, No.1. 27-33.

Sandi Ardiansyah, D. W. (2013). Pengaruh Variasi Panjang Pegas Kopling (Spring Compression) Terhadap Performance Motor Yamaha Jupiter Z 2006. jurnalmahasiswa.unesa.ac.id, 231-237.

Suhirta.

(2008). Pengaruh Gas Hasil Elektrolisa Air. Universitas Indonesia, 35-37

Susilo, Widodo, B., Magdalena, E., & Priyono, A. (2019). Pengaruh Jumlah Bilah Dan Sudut Pasang Terhadap Daya Turbin Angin H-Darrieus Termodifikasi Sebagai Pembangkit Tenaga Listrik Skala Rumah Tangga. Jurnal Energi dan Manufaktur

Vol. 12, 97.


Full Text: PDF

Refbacks

  • There are currently no refbacks.