1. Home
  2. Vol 6, No 1 (2022)
  3. Rhomadhon

ANALISA CAMPURAN MINYAK PLASTIK DENGAN PERTAMAX TERHADAP PERFORMA DAN EMISI GAS BUANG HONDA BEAT 2011

Faat Nur Rhomadhon, Wawan Trisnadi Putra, Fadelan Fadelan

Abstract


Plastic oil is the result of the conversion of plastic waste into fuel oil. The use of plastic waste oil is not directly at 100% use, but it is necessary to have the right dose so that it can be used as a mixture. The method used in this study is experimental research, namely several variations that are carried out successively to the same subject and determine the performance and exhaust emissions on a motorcycle with a mixture of Pertamax and plastic oil and has a CP10 code (pertamax 90% + plastic oil). 10%), CP20 (pertamax 80% + plastic oil 20%), and CP30 (firstmax 70% + plastic oil 30%). The results of all tests of the highest torque occurred in the CP30 mixture of 14,593 Nm at 3000 rpm and the highest power results in the CP30 mixture of 7.1 Kw at 5000 rpm. In the test results the best CO exhaust emissions occurred in the CP10 mixture with emission levels of 1.69% at 5500 rpm while the best HC exhaust emission test results are in the CP10 mixture, which is 81 ppm at 5500 rpm. The lower the CO and HC exhaust gas emission levels, the more efficient the fuel and the more complete combustion. 


Keywords


PP plastic oil, Pertamax, Power, Torque, Exhaust Emissions.

References


Ningrat, A. A. W. K., Kusuma, I. G. B. W., & Adnyana I. W. B. (2016). Pengaruh Penggunaan Bahan Bakar Pertalite Terhadap Akselerasi Dan Emisi Gas Buang Pada Sepeda Motor Bertransmisi Otomatis, 2(1), 59-67.

Suyanto, Wardan. (1989). Teori Motor Bensin. Jakarta: P2LPTK.

Rahardjo, Winarno Dwi dan Karnowo. (2008). Mesin Konversi Energi. Semarang: Universitas Negeri Semarang.

Ginting. M. S. (2017). Teknik, “Analisa Performa Motor Berbahan Bakar Premium Dan Motor Berbahan Bakar Pertamax”. Universitas Muhammadiyah Sumatera Utara.

Fitriyanto I. E. (2016). Pengaruh Campuran Minyak Plastik Low Density Polyethilene Dengan Pertalite Terhadap Performa Mesin Sepeda Motor. Universitas Negeri Semarang.

Sudirman, Urip. (2011). Jurus-jurus Mengehemat BBM. Bandung : Tri Niti Masa.

U. B. Surono. (2013). “Berbagai Metode Bahan Bakar Minyak Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar Minyak,” Jurnal Teknik Universitas Janabadra, vol. 3, no. 1, pp. 32–40.

Suharto. (2010). "Rancangan Produk Bahan Plastik Daur Ulang Sebagai Upaya Peningkatan Industri Kreatif". Jurnal. Politeknik Negeri Semarang. Jawa Tengah. Semarang.

Pratama A. W., Rizky S. (2020). "Uji Karakteristik

Laju Pembakaran Dan Angka Oktan Bahan Bakar Polypropylene Cair Hasil Pemurnian Proses Distilasi Absorsi Dengan Variasi Campuran Oktan Booster." Jurnal Mesin dan Teknologi Manufaktur. Vol. 1. No. 1.

Politeknik Negeri Jember.

Ariawan I. W. B., Kusuma I. G. B W. (2016). “Pengaruh Penggunaan Bahan Bakar Pertalite Terhadap Unjuk Kerja Daya, Torsi Dan Konsumsi Bahan Bakar Pada Sepeda Motor Bertransmisi Otomatis”. Jurnal METTEK Vol. 2 No. 1. Universitas Udayana Kampus Bukit Jimbaran.

Bahtiar F. Z. (2015). “Campuran Minyak Limbah Plastik (Low Density Waste Polyethilene Oil) Dengan Premium Dan Pertamax Terhadap Emisi Gas Buang Sepeda Motor,” Jurusan Fakultas Teknik Mesin, Universitas Negeri Semarang, pp. 1–61.


Full Text: PDF

DOI: 10.24269/jkt.v6i1.1141

DOI (PDF): https://doi.org/10.24269/jkt.v6i1.1141.g582

Refbacks

  • There are currently no refbacks.